Hyundai Veloster: Dual Clutch Transmission(DCT) System
Hyundai Veloster 2011-2017 Service Manual / Dual Clutch Transmission(DCT) System
- Specifications
- Special Service Tools
- Repair procedures
- Dual Clutch Transmission Assembly
- Dual Clutch Transmission(DCT) > Components and Components Location
- Dual Clutch Transmission(DCT) > Repair procedures
- Dual Clutch Transmission Control System
- Description and Operation
- Components and Components Location
- DCT Control Modle (TCM) > Description and Operation
- DCT Control Modle (TCM) > Repair procedures
- Clutch Actuator Motor 1 (Odd Gear) > Description and Operation
- Clutch Actuator Motor 1 (Odd Gear) > Repair procedures
- Clutch Actuator Motor 2 (Even Gear) > Description and Operation
- Clutch Actuator Motor 2 (Even Gear) > Repair procedures
- Gear Actuator Motor > Description and Operation
- Gear Actuator Motor > Repair procedures
- Input Speed Sensor 1 > Description and Operation
- Input Speed Sensor 1 > Repair procedures
- Input Speed Sensor 2 > Description and Operation
- Input Speed Sensor 2 > Repair procedures
- Inhibitor Switch > Description and Operation
- Inhibitor Switch > Repair procedures
- Shift Lever > Components and Components Location
- Shift Lever > Repair procedures
- Gear Actuator > Components and Components Location
- Gear Actuator > Repair procedures
- Dual Clutch System. Description and Operation
Repair procedures
Removal
Back View Camera
1.
Disconnect the negative(-) battery terminal.
2.
Remove the tailgate outside handle assembly.
(Refer to ...
Specifications
Specifications
Model
D6GF1
Engine
Gasoline 1.6 GDI
Shift ratio
1st
3.615
2nd
1 ...
See also:
Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seating positions.
The indications of the system's pr ...
To resume cruising speed at more than approximately 40 km/h (25 mph)
If any method other than the cruise ON/OFF switch was used to cancel cruising
speed and the system is still activated, the most recent set speed will automatically
resume when you move the lever ...
Rear Torsion Beam Axle. Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...