Hyundai Veloster: Dual Clutch Transmission Control System
First generation (2011–present) / Hyundai Veloster 2010-2019 Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System
First generation (2011–present) / Hyundai Veloster 2010-2019 Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System
- Description and Operation
- Components and Components Location
- DCT Control Modle (TCM) > Description and Operation
- DCT Control Modle (TCM) > Repair procedures
- Clutch Actuator Motor 1 (Odd Gear) > Description and Operation
- Clutch Actuator Motor 1 (Odd Gear) > Repair procedures
- Clutch Actuator Motor 2 (Even Gear) > Description and Operation
- Clutch Actuator Motor 2 (Even Gear) > Repair procedures
- Gear Actuator Motor > Description and Operation
- Gear Actuator Motor > Repair procedures
- Input Speed Sensor 1 > Description and Operation
- Input Speed Sensor 1 > Repair procedures
- Input Speed Sensor 2 > Description and Operation
- Input Speed Sensor 2 > Repair procedures
- Inhibitor Switch > Description and Operation
- Inhibitor Switch > Repair procedures
- Shift Lever > Components and Components Location
- Shift Lever > Repair procedures
- Gear Actuator > Components and Components Location
- Gear Actuator > Repair procedures
Dual Clutch Transmission(DCT) > Repair procedures
Removal
1.
Remove the following parts first:
A.
Engine cover (A)
(Refer to the Intake and Exhaust System of EM Group.)
...
Description and Operation
Description
The Dual Clutch Transmission (DCT) control system measures required data
to identify the state of the control target and computes the appropriate compensation
value if adjustment ...
See also:
Tire chains
Tire chains, if necessary, should be installed on the front wheels.
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and chain wear, do ...
Concentric Slave Cylinder Assembly. Components and Components Location
Component
1. Concentric slave cylinder assembly
2. Manual transaxle
...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Tr ...
Categories
© 2011-2019 Copyright www.hvmanual.com