Hyundai Veloster: Voice recognition
First generation (2011–present) / Hyundai Veloster 2010-2019 Owner's Manual / Features of your vehicle / Audio system / Voice recognition
Voice recognition allows hands-free operation of the AV system (RADIO, CD, USB, iPod), navigation and other systems equipped on this vehicle, such as the phone.
NOTE:
To get the best recognition performance out of voice recognition, observe the following:
- Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands correctly.
- Wait until a beep sounds before speaking a command. Otherwise, the command will not be recognized properly.
- Speak in a natural voice without pausing between words.
Storing and recalling stations
You can easily store up to 12 preset stations for later recall at the touch of
a button.
1. Select the band (FM, AM) you want to store a station into. 2. Select the
desired frequency. 3. Touch [P ...
Giving voice commands
1. Press () on the steering wheel
remote control.
2. After the beep sounds, say "Help". All commands shall be listed which are
presented in active fields.
NOTE:
If the command is n ...
See also:
Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
...
Special Service Tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
...
Steering Column and Shaft. Repair procedures
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so ...