Hyundai Veloster Manuals

Hyundai Veloster: Special Service Tools - Dual Clutch Transmission(DCT) SystemHyundai Veloster: Special Service Tools

Special tools

Tool (Product number and name)
Shape
Function
09200-38001,09200-3N000
Engine support bar (beam)

Remove and install transmission.
Supporter (SST No. : 09200-2S100, 2S200) and adapter (SST No. : 09200-4X000) are used together.
※09200-38001 tool can also be used for the task.
09200-2S100
Engine support bar (supporter)

Remove and install transmission
Beam (SST No. : 09200-38001/3N000), supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-4X000) are used together.
09200-2S200
Engine support fixture (Supporter)

Beam (SST No. : 09200-38001/3N000), supporter (SST No. : 09200-2S100) and adapter (SST No. : 09200-4X000) are used together.
09200-4X000
Engine support bar (adapter)

Remove and install transmission
Conventional engine support beam (SST No.: 09200-38001,09200-3N000) and supporter (SST No.: 09200-2S000) are used together.
09431-26100
Differential oil seal installer (for housing and case)

Install differential oil seal (for housing and case).


Specifications
Specifications Model D6GF1 Engine Gasoline 1.6 GDI Shift ratio 1st 3.615 2nd 1 ...

Repair procedures
DCT(Dual Clutch Transmission) Learning 1. Learning Overview and Purpose A. Checks gear shift precision and normal clutch operation in the ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Smart key unit. Schematic Diagrams
Circuit Diagram ...

TPMS Sensor. Repair procedures
Replacement 1. Remove the valve core and deflate the tire. 2. Remove the side of the tire bead area from the wheel using tire changing mac ...

Categories


В© 2011-2025 Copyright www.hvmanual.com