Hyundai Veloster: Clutch Actuator Motor 2 (Even Gear) > Description and Operation

The clutch actuator motor is mounted on the DCT.

The clutch actuator motor comprises an actuator motor that controls the odd clutch and an actuator motor that controls the even clutch.

The odd actuator motor receives signals from the TCM and controls the odd clutch. The even actuator motor receives signals from the TCM and controls the even clutch.

Clutch Actuator Motor 1 (Odd Gear) > Repair procedures

Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector. 3. Measure the resista ...

Clutch Actuator Motor 2 (Even Gear) > Repair procedures

Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector. 3. Measure the resista ...

See also:

Seat Belt Pretensioner (BPT). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the lower anchor b ...

SRS Control Module (SRSCM). Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before b ...

Front Impact Sensor (FIS). Description and Operation
Description The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary pur ...