Hyundai Veloster: Shift Lever > Components and Components Location

Inhibitor Switch > Repair procedures

Inspection 1. Inspect for loosened connectors, faulty connections, bends, corrosion, contamination, deformation, or damage. 2. Disconnec ...

Shift Lever > Repair procedures

Removal 1. Remove the floor console assembly. (Refer to the Interior (Console) of BD Group.) 2. Disconnect the sports mode connector (A ...

See also:

1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution caused by blow-by gases being emitted from the crankcase. This system supplies fresh filtered air to the crankcase th ...

Fuel Pressure Control Valve. Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Rear Torsion Beam Axle. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...