Hyundai Veloster Manuals

Hyundai Veloster: ESC OFF Switch. Repair procedures - ESC(Electronic Stability Control) System - Brake SystemHyundai Veloster: ESC OFF Switch. Repair procedures

Inspection

1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
3.
Remove the crash pad side switch assembly (A).

4.
Check the continuity between the switch terminals as the ESC OFF switch is engaged.


ESC OFF Switch. Description and Operation
Description 1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine tur ...

See also:

Description and Operation
Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), ignition lock switch, connection wires and the battery cable. Whe ...

Categories


В© 2011-2025 Copyright www.hvmanual.com