Hyundai Veloster: Tires/Wheels

Rear Torsion Beam Axle. Repair procedures

Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Alignment. Repair procedures

Front Wheel Alignment • When using a commercially available computerized wheel alignment equipment to inspect the front whee ...

See also:

Shift Lever > Repair procedures
Removal 1. Remove the floor console assembly. (Refer to the Interior (Console) of BD Group.) 2. Disconnect the sports mode connector (A ...

ETC (Electronic Throttle Control) System. Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output ...

Snow tires
If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handli ...