Hyundai Veloster: Canister Close Valve (CCV). Description and Operation

Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Fuel Pressure Control Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Canister Close Valve (CCV). Specifications

Specification Item Specification Coil Resistance (Ω) 19.5 ~ 22.5 [20°C(68°F)] ...

See also:

Steering Column and Shaft. Repair procedures
Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so ...

Engine Control Module (ECM). Schematic Diagrams
Harness Connector ECM Terminal Function Connector [EGGM-A] Pin No. Description Connected to 1 Injector (Cylinder #3) ...

Remote keyless entry system operations
Lock (1) All doors are locked if the lock button is pressed. If all doors, trunk and hood are closed, the hazard warning lights will blink once to indicate that all doors are locked. Also, if ...