Inspection
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the roof trim.
(Refer to the BD group - "Roof trim")
|
3. |
Remove the handsfree mic (A) after disconnect the connector from
roof top.
|
4. |
Check the continuity of Mic between terminals.
|
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and vehicle capac ...
Parking Assist Sensor. Repair procedures
Removal
1.
Remove the rear bumper.
(Refer to the Body group - "Rear bumper")
2.
Disconnect the connector from the rear bumper ...
Troubleshooting
Troubleshooting
Ignition System
Symptom
Suspect area
Remedy
Engine will not start or is hard to start (Cranks OK)
Ignition lock switch ...