Hyundai Veloster: Description and Operation
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Back view camera System / Description and Operation
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Back view camera System / Description and Operation
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle through
the AV monitor while backing-up.
This system is a supplementary function only. It is the responsibility
of the driver to always check the inside/ outside rearview mirror and
the area behind the vehicle before and during backing up because there
are blind spots that can't be seen through the camera.
|
Components and Components Location
Component Location
1. Back view camera
2. LCD monitor
...
See also:
Front Strut Assembly. Components and Components Location
Components
•
Tighten under unladen condition
•
...
Passenger Airbag (PAB) Module. Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB. ...
Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the road as far as po ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
© 2011-2026 Copyright www.hvmanual.com