Hyundai Veloster: DCT Control Modle (TCM) > Description and Operation

The Transmission Control Module (TCM) is like the brain for the DCT. It receives information from various sensors for a wide range of transmission controls to provide an optimal driving environment for the driver. The TCM is programmed for optimal operation in all driving conditions. If the TCM malfunctions, store the failure information in memory and provide the error information to a mechanic for fast and accurate repair.

Components and Components Location

Component Location 1. DCT (Dual Clutch Transmission) 2. DCT Control Module 3. Shift Lever 4. Data Link Connector (DLC) ...

DCT Control Modle (TCM) > Repair procedures

Inspection TCM Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the termina ...

See also:

Crankshaft Position Sensor (CKPS). Description and Operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the eng ...

Measuring Body Dimensions
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

Air cleaner
Filter replacement It must be replaced when necessary, and should not be cleaned and reused. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed ...