Hyundai Veloster Manuals

Hyundai Veloster: Clutch Actuator Motor 1 (Odd Gear) > Description and Operation - Dual Clutch Transmission Control System - Dual Clutch Transmission(DCT) SystemHyundai Veloster: Clutch Actuator Motor 1 (Odd Gear) > Description and Operation

Description

The clutch actuator motor is mounted on the DCT.
The clutch actuator motor comprises an actuator motor that controls the odd clutch and an actuator motor that controls the even clutch.
The odd actuator motor receives signals from the TCM and controls the odd clutch. The even actuator motor receives signals from the TCM and controls the even clutch.


DCT Control Modle (TCM) > Repair procedures
Inspection TCM Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the termina ...

Clutch Actuator Motor 1 (Odd Gear) > Repair procedures
Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector. 3. Measure the resista ...

See also:

Power Window Motor. Repair procedures
Inspection Front Power Window Motor Inspection 1. Remove the front door trim panel. (Refer to the BD group - "Front door") 2. ...

To set cruise control speed:
1. Press the cruise ON/OFF button on the steering wheel, to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which mus ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine tur ...

Categories


В© 2011-2022 Copyright www.hvmanual.com