Hyundai Veloster Manuals

Hyundai Veloster: Back-up Lamp Switch. Specifications - Manual Transaxle Control System - Manual Transaxle System (M6CF1) - Hyundai Veloster 2010-2018 Service ManualHyundai Veloster: Back-up Lamp Switch. Specifications

Specifications

1.
Working voltage: DC 10~15V
2.
Operating force: 3.0kg Max.
3.
Voltage drop: - 0.4V
4.
Working temperature: -30°C ~ 100°C [-30°F ~ 212°F]

Back-up Lamp Switch. Description and Operation
Description Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. ...

Back-up Lamp Switch. Repair procedures
Inspection 1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup la ...

See also:

Repair procedures
Inspection Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn ...

Repair procedures
Inspection Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replac ...

Front Hub / Knuckle. Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel an ...

Categories

© 2011-2018 Copyright www.hvmanual.com