Hyundai Veloster: Back-up Lamp Switch. Description and Operation

Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp.

Shift Lever. Repair procedures

Removal Shift Lever Assembly Replacement 1. Remove the floor Interior console assembly. (Refer to "Interior(Console)" in BD group) ...

Back-up Lamp Switch. Specifications

Specifications 1. Working voltage: DC 10~15V 2. Operating force: 3.0kg Max. 3. Voltage drop: - 0.4V ...

See also:

Immobilizer system
Your vehicle is equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignition key ...

Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your sunroof system as follows: 1. Turn the ignition switch to the ON position. 2. Close the sunroof. 3. Release the sun ...

Interior Trim. Components and Components Location
Components [RH] 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Cowl side trim 6. Front door ...