Hyundai Veloster: Seat Heater. Repair procedures

First generation (2011–present) / Hyundai Veloster 2010-2018 Service Manual / Body Electrical System / Seat Electrical / Seat Heater. Repair procedures

Inspection

First Seat Heater

1.

Check for continuity and measure the resistance between terminals.

[Cushion]

No.	Description	No.	Description
1	-	4	NTC-
2	-	5	NTC+
3	Heater(-)	6	Heater(+)

Standard value (Fabric / Leather)

Cushion : 1.18 Ω ± 10%

Back: 1.13 Ω ± 10%

Set : 2.31 Ω ± 10%

2.

Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

Standard value (Fabric / Leather)

Cushion :

High : 42 ± 2°C(107.6 ± 35.6°F) / LOW : 39 ± 2°C(102.2 ± 35.6°F)

Back :

High : 52 ± 2°C(125.6 ± 35.6°F) / LOW : 46 ± 2°C(114.8 ± 35.6°F)

Seat Heater. Schematic Diagrams

Circuit Diagram ...

Fuses And Relays

...

See also:

Vehicle weight
This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability. Properly loading your vehicle will provide maximum return ...

Brake Line. Repair procedures
Removal 1. Disconnect the brake fluid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cyl ...

Troubleshooting
Troubleshooting Symptom Suspect area Engine will not start or struggle to start Vapor hose damaged or disconnected Engine strugg ...

Categories

© 2011-2018 Copyright www.hvmanual.com