Hyundai Veloster: Turn Signal Lamp. Repair procedures
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp. Repair procedures
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp. Repair procedures
Removal
Door Mirror Turn Signal Lamp
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the mirror(A) from the mirror holder.
|
| 3. |
Loosen the fixing clip and remove the door mirror cover(A).
|
| 4. |
Loosen a screw and disconnect a connector(A). Remove the door
mirror turn signal lamp(B).
|
Installation
Door Mirror Turn Signal Lamp
| 1. |
Install the door mirror turn signal lamp after connecting the
connector.
|
| 2. |
Install the door mirror cover.
|
| 3. |
Connect the battery terminal (-) and check the lamp operation.
|
Rear combination lamp. Repair procedures
Removal
Rear Combination lamp
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (B) after loosening 2 screws, an ...
Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "IPM&quo ...
See also:
Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it
to reach normal operating temperature. 3. Turn the engine off and wait for a few
minutes (about 5 minutes) for the oil ...
Light bulbs
WARNING - Working on the lights
Prior to working on the light, firmly apply the parking brake, ensure that
the ignition switch is turned to the LOCK position and turn off the lights to avoid
sudd ...
Power Door Lock Actuators. Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to the BD group - "Front door")
2.
R ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
В© 2011-2024 Copyright www.hvmanual.com