Hyundai Veloster Manuals

Hyundai Veloster: Special Service Tools - General Information - Manual Transaxle System (M6CF1)Hyundai Veloster: Special Service Tools

Hyundai Veloster 2011-2017 Service Manual / Manual Transaxle System (M6CF1) / General Information / Special Service Tools

Special Service Tools

Tool
(Number and name)
 Illustration
 Use
09200-38001,3N000 (Beam)
09200-4X000 (Adapter)
09200-2S100, 2S200 (Supporter)
Engine support assembly

Removal and installation of the transaxle.
Use assembling 09200-4X000 (Adapter) and 09200-2S100, 2S200 (Supporter) on 09200-38001, 3N000(Beam).
09200-3N000
Engine support fixture
(Beam)

Removal and installation of the transaxle.
Use this adapter (SST No. : 09200-4X000) with the supporter (SST No. : 09200-2S100, 2S200).
※Permit operating with 09200-38001.
09200-2S100
Engine support fixture
(Supporter)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-4X000).
09200-2S200
Engine support fixture
(Supporter)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/3N000) with the adapter (SST No. : 09200-4X000) and supporter (SST No. : 09200-2S100).
09200-4X000
Engine support fixture (Adapter)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S100, 2S000).


Specifications
Specifications Transaxle type M6CF1 Engine type Gasoline 1.6 GDI Gear ratio 1st 3.615 2n ...

Manual Transaxle System
...

See also:

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or inse ...

Shoulder belt extension guide
You can adjust the position of the shoulder belt extension guide for easier access to the shoulder belt. Set the belt extension guide to the position (1~3) when using the seat belt. WARNING ...

Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to the BD group - "Cra ...

Categories


В© 2011-2025 Copyright www.hvmanual.com