The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. If the system is able to correctly detect an under inflation warning at the same time as system failure then it will illuminate the TPMS malfunction indicator.
Have the system checked by an authorized HYUNDAI dealer as soon as possible to determine the cause of the problem.
CAUTION
DCT Control Modle (TCM) > Repair procedures
Inspection
TCM Inspection Procedure
1.
Inspecting TCM ground circuit: Measure the resistance between
the TCM and chassis ground.
(Check the termina ...
Rear Torsion Beam Axle. Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter,
it may overheat and create a fire hazard. To prevent this obse ...