Hyundai Veloster: To temporarily accelerate with the cruise control on
Hyundai Veloster 2011-2017 Owner's Manual / Driving your vehicle / Cruise control system / To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator pedal.
To decrease the cruising speed
Follow either of these procedures:
Move the lever down (to SET-) and hold it. Your vehicle will gradually
slow down. Release the lever at the speed you want to maintain.
Move the lever down ...
To cancel cruise control, do one of the following
Depress the brake pedal.
Depress the clutch pedal if equpped with a manual transaxle.
Shift into N (Neutral) if equpped with an automatic transaxle.
Press the CANCEL switch located on the s ...
See also:
Side Impact Sensor (SIS). Repair procedures
Removal
Side Impact Sensor
1.
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
2.
Remo ...
Brake Line. Repair procedures
Removal
1.
Disconnect the brake fluid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cyl ...
Roof Trim. Components and Components
Location
Components
[General Type]
1. Roof trim
2. Retainer
3. Sunvisor
4. Assist handle
5. Assist handle bracket assembly
6. Garment hook assembly
7. ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
