Hyundai Veloster: Fuses And Relays

Seat Heater. Repair procedures

Inspection First Seat Heater 1. Check for continuity and measure the resistance between terminals. [Cushion] No. ...

Components and Components Location

Component Location 1. A/C relay 2. Fuel pump relay 3. Rear wiper relay 4. Blower relay 5. Buglar alarm horn realy 6. Front wiper relay 7. Starter relay ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

SRS components and functions
The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side impact air bag modules 4. Curtain air bag modules 5. Retractor p ...

Engine coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once ...