Hyundai Veloster Manuals

Hyundai Veloster: Description and Operation - General Information - Emission Control SystemHyundai Veloster: Description and Operation

Description

Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
•
The Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
•
The Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.

General Information
...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C( ...

See also:

Repair procedures
Component Replacement After Deployment Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Tr ...

Specifications
Specifications Item Specification Master cylinder Type Tandem Cylinder I.D. 22.22 mm (0.875 in) ...

Fuel Pressure Control Valve. Description and Operation
Description Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on ...

Categories

© 2011-2026 Copyright www.hvmanual.com