Description
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
DCT Control Modle (TCM) > Repair procedures
Inspection
TCM Inspection Procedure
1.
Inspecting TCM ground circuit: Measure the resistance between
the TCM and chassis ground.
(Check the termina ...
Power Window Switch. Repair procedures
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
...
Repair procedures
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to “Release
Residual Pressure in Fuel Line” in this group).
...