Hyundai Veloster Manuals

Hyundai Veloster: Rheostat. Repair procedures - Lighting System - Body Electrical SystemHyundai Veloster: Rheostat. Repair procedures

Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Lighting System / Rheostat. Repair procedures

Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower switch(A).
(Refer to the BD group - "Crash pad")
3.
Remove the crash pad side switch assemby (A).
4.
The installation is the reverse of removal.
[Crash pad side switch connector]
Pin No.
 Connector
LHD
 RHD
1
 ECO
 Ignition
2
 -
 ESC
3
 PAS
 ISG indicator
4
 PAS indicator
 ISG
5
 ISG
 PAS indicator
6
 ISG indicator
 PAS
7
 ESC
 -
8
 Ignition
 ECO
9
 Ground
 Rheostat Down
10
 Illumination (+)
 Rheostat Up
11
 -
 -
12
 Illumination (-)
 -
13
 -
 Illumination (-)
14
 -
 -
15
 Rheostat Up
 Illumination (+)
16
 Rheostat Down
 Ground


Hazard Lamp Switch. Repair procedures
Inspection 1. The GDS will be able to diagnose defects of hazard switch quickly. The GDS can operates actuator manually, input/output value monitoring and self diagno ...

Fog Lamps. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multifunction switch. (Refer to the &q ...

See also:

Brake Booster. Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop ...

Trailer towing
We do not recommend using this vehicle for trailer towing. ...

Auto Light Sensor. Repair procedures
Inspection In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto ligh ...

Categories

В© 2011-2026 Copyright www.hvmanual.com