Hyundai Veloster Manuals

Hyundai Veloster: License Lamp. Repair procedures - Lighting System - Body Electrical SystemHyundai Veloster: License Lamp. Repair procedures

Removal

1.
Disconnect the negative(-) battery terminal.
2.
Replace the bulb after turning the socket (A).


Installation

1.
Install the bulb.
2.
Install the lens and license lamp.

Overhead Console Lamp. Repair procedures
Inspection 1. Remove the overhead console lamp (map lamp) assembly then check for continuity between terminals. If the continuity is not as specified, replace the map ...

Hazard Lamp Switch. Repair procedures
Inspection 1. The GDS will be able to diagnose defects of hazard switch quickly. The GDS can operates actuator manually, input/output value monitoring and self diagno ...

See also:

ETC (Electronic Throttle Control) System. Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output ...

Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1. ...

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If ...

Categories


© 2011-2023 Copyright www.hvmanual.com