Hyundai Veloster: Knock Sensor (KS). Specifications

Knock Sensor (KS). Description and Operation

Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knoc ...

Knock Sensor (KS). Schematic Diagrams

Circuit Diagram ...

See also:

Knock Sensor (KS). Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake ...

Canister Close Valve (CCV). Specifications
Specification Item Specification Coil Resistance (Ω) 19.5 ~ 22.5 [20°C(68°F)] ...

DCT Control Modle (TCM) > Repair procedures
Inspection TCM Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the termina ...