Hyundai Veloster: Fuel Tank Pressure Sensor (FTPS). Description and Operation

Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solenoid valve operation and detects a leakage of the system.

Accelerator Position Sensor (APS). Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the ...

Fuel Tank Pressure Sensor (FTPS). Specifications

Specification Pressure [kPa (kgf/cm², in H2O) Output Voltage (V) -6.67 (-0.068, -26.8) 0.5 0 2.5 ...

See also:

1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution caused by blow-by gases being emitted from the crankcase. This system supplies fresh filtered air to the crankcase th ...

Servicing The Electrical System
1. Prior to servicing the electrical system, be sure to turn off the ignition switch and disconnect the battery ground cable. ...

Front Components and Components Location
Components-1 1. Front bumper cover 2. Front bumper side bracket [LH] 3. Front bumper side bracket [RH] Components-2 (T-GDI) 1. Front b ...