Hyundai Veloster: Fuel Pressure Control Valve. Description and Operation

Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Variable Intake Solenoid (VIS) Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance betwe ...

Fuel Pressure Control Valve. Specifications

Specification Item Specification Coil Resistance (Ω) 0.5 [20°C(68°F) ...

See also:

How does the air bag system operate
Air bags are activated (able to inflate if necessary) only when the ignition switch is turned to the ON or START position. Air bags inflate instantly in the event of serious frontal or side co ...

Child restraint system
Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident s ...

Steering Column and Shaft. Repair procedures
Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so ...