Hyundai Veloster: Front fog light
Fog lights are used to provide improved visibility when visibility is poor due to fog, rain or snow etc. The fog lights will turn on when fog light switch (1) is turned to ON after the headlights are turned on. To turn off the fog lights, turn the switch to OFF.
CAUTION
When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor or unnecessary battery and generator drain could occur.
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn si ...
Wipers and washers
A :Wiper speed control (front) · 2 – High wiper speed · 1 – Low wiper speed ·
--- – Intermittent wipe · AUTO* – Automatic control wipe · O – Off ·
– Single wipe
B : Intermitte ...
See also:
DCT Control Modle (TCM) > Repair procedures
Inspection
TCM Inspection Procedure
1.
Inspecting TCM ground circuit: Measure the resistance between
the TCM and chassis ground.
(Check the termina ...
Instrument Cluster. Description and Operation
Active ECO System
1.
Active ECO System
While the general eco system encourages the driver to drive efficiently
by displaying ECO lights on the dashboard, the activ ...
Seat Belt Buckle Switch (BS). Description and Operation
Description
The SRSCM shall monitor the status of the driver and front passenger seat
belt buckle. The SRSCM provides one pin each for the driver and front passenger
seat belt buckle status ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
