Description
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
Seat Heater. Repair procedures
Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between terminals.
[Cushion]
No.
...
Power Seat Control Switch. Repair procedures
Inspection
1.
With the lumbar support switch (A) in each position, make sure
that continuity exists between the terminals below. If continuity is
not as specified, re ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase. This system supplies fresh
filtered air to the crankcase th ...