Hyundai Veloster Manuals

Hyundai Veloster: Curtain Airbag (CAB) Module. Description and Operation - Airbag Module - Restraint (Advanced)Hyundai Veloster: Curtain Airbag (CAB) Module. Description and Operation

Hyundai Veloster 2011-2017 Service Manual / Restraint (Advanced) / Airbag Module / Curtain Airbag (CAB) Module. Description and Operation

Description

Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Side Airbag (SAB) Module. Repair procedures
Removal The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airba ...

Curtain Airbag (CAB) Module. Components and Components Location
Components ...

See also:

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when ...

Intake Air Temperature Sensor (IATS). Description and Operation
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction o ...

Purge Control Solenoid Valve (PCSV). Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when ...

Categories


В© 2011-2024 Copyright www.hvmanual.com