Hyundai Veloster: Anchor Pretensioner (APT). Description and Operation

Front anchor pretensioner operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver seat and it is an equipment to make up for the existing short stroke. Front anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.

Seat Belt Pretensioner (BPT). Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the seat belt afte ...

Anchor Pretensioner (APT). Components and Components Location

Components ...

See also:

Clutch Actuator Motor 2 (Even Gear) > Repair procedures
Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector. 3. Measure the resista ...

Owner’s responsibility
✽ NOTICE Maintenance Service and Record Retention are the owner's responsibility. You should retain documents that show proper maintenance has been performed on your vehicle in accordan ...

Front Hub / Knuckle. Components and Components Location
Components 1. Drive shaft caulking nut 2. Brake disc 3. Hub 4. Wheel bearing 6. Snap ring 7. Dust cover 8. Knuckle 9. Drive shaft ...