Hyundai Veloster Manuals

Hyundai Veloster: Troubleshooting - General Information - Emission Control SystemHyundai Veloster: Troubleshooting

Troubleshooting

Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
Engine struggles to start
Malfunction of the Purge Control Solenoid Valve
Rough idle or engine stalls
Vapor hose damaged or disconnected
Malfunction of the PCV valve
Rough idle
Malfunction of the Evaporative Emission Control System
Excessive oil consumption
Positive crankcase ventilation line clogged


Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C( ...

Schematic Diagrams
Schematic Diagram ...

See also:

Clutch Actuator Motor 2 (Even Gear) > Repair procedures
Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector. 3. Measure the resista ...

Troubleshooting
Troubleshooting Problem Symptoms Table Use the table below to help you find the cause of theproblem. The numbers indicate the priority of the likecause of the problem. Check each p ...

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures reco ...

Categories

© 2011-2026 Copyright www.hvmanual.com