Hyundai Veloster: Specifications
Specification
|
Description |
Specification |
|
|
Ultrasonic sensor |
Rated voltage |
DC 12V |
|
Detecting range |
11.8~47.2 in (300 ~ 1,200 mm) |
|
|
Operating voltage |
DC 8 ~ 10 V |
|
|
Rated current |
MAX. 20 mA |
|
|
Operating temperature |
-22°F~+176°F(-30°C ~ +80°C) |
|
|
Preservation temperature |
-40°F~+185°F(-40°C ~ +85°C) |
|
|
Frequency |
48 ± 5 KHZ |
|
|
Number of sensors |
4 EA (Right, Center-right, Center-left, Left) |
|
Components and Components LocationWindshield Wiper-Washer Switch. Repair procedures
Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer S ...
Crankshaft Position Sensor (CKPS). Troubleshooting
Waveform
[NON-ISG]
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft
Position Sensor(CMPS) waveform at idle.The PCM controls the injection and igni ...
Giving voice commands
1. Press () on the steering wheel
remote control.
2. After the beep sounds, say "Help". All commands shall be listed which are
presented in active fields.
NOTE:
If the command is n ...