Hyundai Veloster: Removable towing hook
Hyundai Veloster 2011-2017 Owner's Manual / What to do in an emergency / Towing / Removable towing hook
1. Open the tailgate, and remove the towing hook from the tool case.
2. Remove
the hole cover pressing the lower part of the cover on the bumper.
3. Install
the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Hyundai dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent dam ...
Emergency towing
If towing is necessary, we recommend you to have it done by an authorized Hyundai
dealer or a commercial tow truck service.
If towing service is not available in an emergency, your vehicle may be ...
See also:
Rear Components and Components
Location
Components-1
1. Rear bumper cover
2. Tail trim lower cover
3. Rear bumper side bracket [RH]
4. Rear bumper side bracket [LH]
Components-2 (T-GDI)
...
Engine Coolant Temperature Sensor (ECTS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immers ...
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
