Hyundai Veloster: Brake Line. Components and Components Location

Master Cylinder. Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery (A) and ECM (B). (Refer ...

Brake Line. Repair procedures

Removal 1. Disconnect the brake fluid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cyl ...

See also:

Front Body. Body Repair
Front Body A Hood hinge mounting hole (Ø10) Fender apron upper member corner Front shock ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine tur ...

Troubleshooting
Troubleshooting Ignition System Symptom Suspect area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch ...