Hyundai Veloster: Rear Washer Switch. Repair procedures

Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and washer switch.

Rear Wiper Motor. Repair procedures

Inspection Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to t ...

Rear Washer Motor. Repair procedures

Inspection 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. ...

See also:

Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupa ...

Back-up Lamp Switch. Repair procedures
Inspection 1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup la ...

Smart key function
1.Door lock 2.Door unlock 3.Trunk unlock 4.Panic With a smart key, you can lock or unlock a door (and trunk) and even start the engine without inserting the key. Refer to the following for more d ...