Hyundai Veloster: Opening the fuel filler lid
First generation (2011–present) / Hyundai Veloster 2010-2019 Owner's Manual / Features of your vehicle / Fuel filler lid / Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling the fuel filler lid opener switch.
✽ NOTICE
If the fuel filler lid will not open because ice has formed around it, tap lightly or push on the lid to break the ice and release the lid. Do not pry on the lid. If necessary, spray around the lid with an approved de-icer fluid (do not use radiator anti-freeze) or move the vehicle to a warm place and allow the ice to melt.
1. Stop the engine.
2. To open the fuel filler lid, pull the fuel filler lid
opener switch.
3. Pull the fuel filler lid (1) out to fully open.
4. To remove
the cap, turn the fuel tank cap (2) counterclockwise.
5. Refuel as needed.
Fuel filler lid
...
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “click” one time. This indicates
that the cap is securely tightened. 2. Close the fuel filler lid and push it in
lightly making sure that it is se ...
See also:
Concentric Slave Cylinder Assembly. Components and Components Location
Component
1. Concentric slave cylinder assembly
2. Manual transaxle
...
Front Strut Assembly. Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Climate control air filter
The climate control air filter installed behind the glove box filters the dust
or other pollutants that come into the vehicle from the outside through the heating
and air conditioning system. If ...