1.Press the "FM/AM" button to select the radio.
2.Press the "FM/AM" repeatedly to select a band. The mode switches as follows.
FM ➟ AM ➟ FM...
NOTE:
To select the FM/AM by touching the screen, touch (FM) on the screen to select the AM and then touch (AM).
3.Auto tuning:
Touch ()/() on the screen.
Or press <SEEK/TRACK> on the control panel.
- When a station is received, searching stops.
Manual tuning:
Rotate the Jog dial leftward/ rightward on the control panel.
- The frequencies move up and down step by step.
Input Speed Sensor 2 > Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Remove the under cover.
2.
Disconnect the inp ...
Reset items
Items should be reset after the battery has been discharged or the battery has
been disconnected.
Auto up/down window (See section 4)
Sunroof (See section 4)
Trip computer (See section 4)
...
Antenna
Glass antenna (if equipped)
When the radio power switch is turned on while the ignition key is in either
the “ON” or “ACC” position, your car will receive both AM and FM broadcast signals ...