Hyundai Veloster: Giving voice commands
Hyundai Veloster 2011-2017 Owner's Manual / Features of your vehicle / Audio system / Giving voice commands
1. Press (
) on the steering wheel
remote control.
2. After the beep sounds, say "Help". All commands shall be listed which are presented in active fields.
NOTE:
- If the command is not recognized, the system announces, 1st time "Pardon?", 2nd time "Please, repeat", and 3rd time "Command is not recognized".
- If you want to cancel the voice recognition, press () one more time or press the any button or touch screen say "Cancel".
- If you want to adjust the volume of the system feedback, press VOL+ or VOL-on the steering wheel remote control or use the volume knob (VOLUME) on the control while the voice recognition is active.
Voice recognition
Voice recognition allows hands-free operation of the AV system (RADIO, CD, USB,
iPod), navigation and other systems equipped on this vehicle, such as the phone.
NOTE:
To get the best recognition p ...
How to say numbers
Voice recognition requires a certain way to say numbers in voice commands. Refer
to the following examples. (General rule: Either "zero" or "oh" can be used for
"0".) ...
See also:
Clutch Actuator Motor 2 (Even Gear) > Repair procedures
Inspection
1.
Turn off the ignition switch.
2.
Disconnect the clutch motor connector.
3.
Measure the resista ...
Interior Trim. Components and Components
Location
Components
[RH]
1. Front pillar trim
2. Center pillar lower trim
3. Center pillar upper trim
4. Rear pillar trim
5. Cowl side trim
6. Front door ...
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold Tires” means the vehicle has not been driven for at least three hours
or driven less than one mile (1. ...