Hyundai Veloster: Engine coolant
First generation (2011–present) / Hyundai Veloster 2010-2019 Owner's Manual / Maintenance / Engine coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season, and before traveling to a colder climate.
Changing the engine oil and filter
Have engine oil and filter changed by an authorized HYUNDAI dealer according
to the Maintenance Schedule at the beginning of this section.
CALIFORNIA PROPOSITION 65 WARNING
Engine oil contains c ...
Checking the coolant level
WARNING Removing radiator cap
• Never attempt to remove the radiator cap while the engine is operating
or hot. Doing so might lead to cooling system and engine damage and could result
in s ...
See also:
ESC Control Module. Repair procedures
Removal
1.
Turn ignition switch OFF.
2.
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
...
Steering Angle Sensor. Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power
Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine tur ...
Front Repair procedures
Replacement
Front Seat Belt Replacement
•
When installing the belt, make sure not to
damag ...