Hyundai Veloster Manuals

Hyundai Veloster: Rear Washer Motor. Repair procedures - Rear Wiper/Washer - Body Electrical SystemHyundai Veloster: Rear Washer Motor. Repair procedures

Inspection

1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter.
2.
Connect positive (+) and negative (-) battery cables to terminals 3 and 2 respectively.
3.
Check that the motor operates normally and the washer motor runs and water sprays from the rear nozzle.
4.
If they are abnormal, replace the washer motor.

Pin No.
Description
1
Ground
2
Front windshield washer (+)
3
Rear windshield washer (+)


Rear Washer Switch. Repair procedures
Inspection Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and washer switch. Rear Wiper Switch ...

Hands Free System
...

See also:

Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly. WARNING Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P(Park) pos ...

Specifications
Specification Item Description Power source 3V Operating temperature -20°C ~ +60°C RF Modulation ...

Passenger Airbag (PAB) Module. Description and Operation
Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...

Categories


© 2011-2024 Copyright www.hvmanual.com