Hyundai Veloster: Front Impact Sensor (FIS). Components and Components Location

Front Impact Sensor (FIS). Description and Operation

Description The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary pur ...

Front Impact Sensor (FIS). Repair procedures

Removal • Removal of the airbag must be performed according to the precautions/ procedures d ...

See also:

Overhead Console Lamp. Repair procedures
Inspection 1. Remove the overhead console lamp (map lamp) assembly then check for continuity between terminals. If the continuity is not as specified, replace the map ...

Intake Air Temperature Sensor (IATS). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between th ...

DCT Control Modle (TCM) > Repair procedures
Inspection TCM Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the termina ...