Hyundai Veloster Manuals

Hyundai Veloster: Purge Control Solenoid Valve (PCSV). Specifications - Engine Control System - Fuel SystemHyundai Veloster: Purge Control Solenoid Valve (PCSV). Specifications

Hyundai Veloster 2011-2017 Service Manual / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV). Specifications

Specification

Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]


Purge Control Solenoid Valve (PCSV). Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when ...

Purge Control Solenoid Valve (PCSV). Schematic Diagrams
Circuit Diagram ...

See also:

Wheel. Repair procedures
Hub Nut Tightening Sequence Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capac ...

Fuel Pressure Control Valve. Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Categories

© 2011-2020 Copyright www.hvmanual.com