Hyundai Veloster: Occupant classification system
First generation (2011–present) / Hyundai Veloster 2010-2018 Owner's Manual / Safety features of your vehicle / Air bag - advanced supplemental restraint system / Occupant classification system
Your vehicle is equipped with an occupant classification system in the front passenger's seat.
The occupant classification system is designed to detect the presence of a properly-seated front passenger and determine if the passenger's front air bag should be enabled (may inflate) or not. The driver's front air bag is not affected or controlled by the occupant classification system.
WARNING
Do not put anything in front of the passenger air bag off indicator
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module 2. Passenger's front air bag module 3. Side
impact air bag modules 4. Curtain air bag modules 5. Retractor p ...
Main components of occupant classification system
A detection device located within the front passenger seat frame.
Electronic system to determine whether the front passenger air bag system
should be activated or deactivated.
A warning ligh ...
See also:
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
All season tires
HYUNDAI specifies all season tires on some models to provide good performance
for use all year round, including snowy and icy road conditions. All season tires
are identified by ALL SEASON and/or ...
ESC Control Module. Repair procedures
Removal
1.
Turn ignition switch OFF.
2.
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
...