Hyundai Veloster: Front Axle Assembly

Troubleshooting

Troubleshooting Trouble Symptom Probable cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace ...

Front Hub / Knuckle. Components and Components Location

Components 1. Drive shaft caulking nut 2. Brake disc 3. Hub 4. Wheel bearing 6. Snap ring 7. Dust cover 8. Knuckle 9. Drive shaft ...

See also:

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when ...

Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp fo ...

Clutch Release Cylinder. Repair procedures
Removal 1. Drain the brake fluid through the bleed plug (A). 2. Remove the clutch release cylinder assembly (C) after removing th ...