Hyundai Veloster: Defogging logic
To reduce the probability of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as 
or
position.To cancel or return the defogging
logic, do the following.
Automatic climate control system
To defog inside windshield
1. Select desired fan speed. 2. Select desired temperature. 3. Press the
defroster button (). 4. The air-conditioning
will turn on according to the detected ambient t ...
Manual climate control system
1. Turn the ignition switch to the ON position. 2. Select the defrost button
(). 3. Press the air intake control
button at least 5 times within 3 seconds.
The indicator on the air intake button ...
See also:
ETC (Electronic Throttle Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
...
IPM (Intelligent integrated Platform Module). Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel. (Refer to the BD group - "Crash
pad&quo ...
Camshaft Position Sensor (CMPS). Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
