Hyundai Veloster: Components and Components Location
First generation (2011–present) / Hyundai Veloster 2010-2019 Service Manual / Emission Control System / General Information / Components and Components Location
Components Location
|
1. PCV valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) |
5. Canister Close Valve (CCV) 6. Fuel Level Sender (FLS) 7. Fuel tank air filter 8. Catalytic converter |
|
1. PCV valve |
2. Canister |
|
|
|
|
3. Purge Control Solenoid Valve (PCSV) |
4. Fuel Tank Pressure Sensor (FTPS) |
|
|
|
|
5. Canister Close Valve (CCV) 7. Fuel tank air filter |
6. Fuel Level Sender (FLS) |
|
|
|
|
8. Catalytic converter (WCC) |
8. Catalytic converter (UCC) |
|
|
|
Schematic Diagrams
Schematic Diagram
...
See also:
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold Tires” means the vehicle has not been driven for at least three hours
or driven less than one mile (1.6 km ...
Rear Glass Defogger Switch. Repair procedures
Inspection
1.
The rear glass defogger switch inputs can be checked using the
GDS.
2.
To check the input value of rear glass defogger switc ...
Input Speed Sensor 2 > Description and Operation
Description
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the TCM. It provides important input
information for electric contr ...