Hyundai Veloster Manuals

Hyundai Veloster: Vehicle stability management (VSM) - Brake system - Driving your vehicleHyundai Veloster: Vehicle stability management (VSM)

This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between right wheels and left wheels when braking.

VSM operation

When the VSM is in operation, ESC indicator light (blinks.) blinks.

When the vehicle stability management is operating properly, you can feel a slight pulsation in the vehicle and/or abnormal steering responses (EPS). This is only the effect of brake and EPS control and indicates nothing unusual.

The VSM does not operate when:

VSM operation off

If you press the ESC OFF button to turn off the ESC, the VSM will also cancel and the ESC OFF indicator light (To turn on the VSM, press the button again. The ESC OFF indicator light goes out.) illuminates. To turn on the VSM, press the button again. The ESC OFF indicator light goes out. Malfunction indicator

The VSM can be deactivated even if you don’t cancel the VSM operation by pressing the ESC OFF button. It indicates that a malfunction has been detected somewhere in the Electric Power Steering system or VSM system. If the ESC indicator light (take your vehicle to an authorized HYUNDAI dealer and have the system checked.) or EPS warning light remains on, take your vehicle to an authorized HYUNDAI dealer and have the system checked.

✽ NOTICE

WARNING

Good braking practices
WARNING • Whenever you leave or park your vehicle, always set the parking brake as far as possible and fully engage the vehicle's transaxle into the P (Park) position. If the parking b ...

Hill-start assist control (HAC)
A vehicle has the tendency to slip back on a steep hill when the driver begins to accelerate after a stop. The Hill-start Assist Control (HAC) prevents the vehicle from slipping back by operating ...

See also:

Impact sensing door unlock system
All doors will be automatically unlocked when the impact is delivered to impact sensors while the ignition switch is ON. However, the doors may not be unlocked if mechanical problems occur with th ...

Clutch Actuator Motor 1 (Odd Gear) > Description and Operation
Description The clutch actuator motor is mounted on the DCT. The clutch actuator motor comprises an actuator motor that controls the odd clutch and an actuator motor that controls the even ...

Components and Components Location
Components Location 1. Torsion beam axle 2. Shock absorber 3. Coil spring assembly ...

Categories

© 2011-2020 Copyright www.hvmanual.com