Hyundai Veloster: Side Impact Sensor (SIS). Description and Operation

The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (SIS) is to provide an indication of a collision. The Side Impact Sensor (SIS) sends acceleration data to the SRSCM.

Front Impact Sensor (FIS). Repair procedures

Removal • Removal of the airbag must be performed according to the precautions/ procedures d ...

Side Impact Sensor (SIS). Components and Components Location

Components ...

See also:

Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1. ...

DCT Control Modle (TCM) > Repair procedures
Inspection TCM Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the termina ...

Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extra distance for braking. Av ...